- ホームページ
- 電源管理
- モーターとゲート・ドライバ
- ローサイド・ドライバ
- SGM48535A
SGM48535A
Low-Side Gate Drivers with Fast Response Over-Current Protection
The SGM48534A, SGM48534B, SGM48535A, and SGM48535B are single-channel low-side power transistor gate drivers. Inputs are compatible with standard CMOS or LSTTL signals. The output is capable of delivering 2.6A sink and 4.2A source peak currents. The SGM4853XA/B have over-current protection functions. The OCP pin detects the over-current signal, and the EN/nFLT pin outputs the over-current status. Once the over-current protection is triggered, the fault pin is pulled down internally and outputs a low level. The EN/nFLT pin requires an external pull-up circuit to ensure the normal operation of the driver. The EN/nFLT pin can also be used as an enable pin for the driver. Pulling the EN/nFLT pin low can disable the driver. The driver has under-voltage protection function, and the output remains low when the VCC voltage is lower than the operating voltage.
The SGM4853XA/B are all available in a Green SOT-23-6 package.
- Over-Current Detection Threshold:
- SGM4853XA: -0.25V Negative Voltage with ±6% Detection Accuracy
- SGM4853XB: +0.5V Positive Voltage with ±6% Detection Accuracy
- Independent Fault Output and Enable Control Pin
- Programmable Fault Clearing Time and OverCurrent Detection Response Time
- The Input Has CMOS Schmitt Trigger Circuit to Enhance Noise Immunity
- Inputs are Compatible with Standard CMOS or LSTTL Signals
- OCP Pin Withstands -10V DC Voltage
- Under-Voltage Lockout (UVLO)
- Available in a Green SOT-23-6 Package
Switched-Mode Power Supplies
DC/DC Converters
Solar Inverters, Motor Control, UPS
Companion Gate-Driver Devices for Digital-Power Controllers
Renewable Energy Power Conversion
