The SGM7300AN is a differential 2-channel switch which can be used for both multiplexer (MUX) and demultiplexer (DEMUX) configurations. The device can be used for PCI Express Generation 3, USB 3.1 and other high-speed serial interface applications.
The product can switch dual differential signals to 1 of 2 locations. The SGM7300AN minimizes the impedance of the switch so that the attenuation observed through the switch can be ignored and minimizes the inter-channel skew and inter-channel crosstalk required for high-speed serial interfaces. The SGM7300AN can achieve extremely low power consumption by extending existing high-speed ports. In order to achieve high ESD tolerance, the ESD protection circuits are integrated into ICs.
The SGM7300AN optimizes the pins to match the product to different application layouts. It is suitable for edge connectors with different signal sources on the motherboard, with input and output pins on opposite sides of the package. The impedances of all Ports are Hi-Z relative to GND pin.
No external DC blocking capacitors are required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost.
The SGM7300AN is available in a Green TLGA-2.5×4.5-20L package.
- High Bandwidth: 9GHz
- Support 10Gbps Signal Transmission
- Support USB 3.1 Gen1 and Gen2 Data Rates
- Low Insertion Loss:
- -0.36dB at 0.1GHz
- -0.71dB at 4.0GHz
- Low Off-State Isolation: -21dB at 4.0GHz
- Low Return Loss: -20dB at 4.0GHz
- Available in a Green TLGA-2.5×4.5-20L Package
USB 3.1
PCI Express Generation 3
DisplayPort 1.2
SATA 6Gbit/s
High-Speed Differential Signals Routing
