The TD24CM02-R is a 2-Mbit I2C-compatible serial EEPROM device. The device is designed to operate in a supply voltage range of 1.7V to 5.5V, with a maximum of 1MHz transfer rate, over an operating temperature range of -40℃ to +125℃. The device incorporates a Write Protection pin used for hardware Write Protection on the whole memory array, and offers Software Write Protection feature for users to write-protect the memory by blocks.
The serial EEPROM memory is organized as 1024 pages of 256 bytes each, totaling 262144 × 8 bits. The device offers an additional 256-byte Identification Page for users to store sensitive application parameters. This page can be permanently locked in Read-only mode after the application data is written into this Page. The device also offers a separate memory block containing a factory programmed 128-bit Unique ID. This block is in Read-only mode and can be accessed by sending a specific Read command.
The TD24CM02-R is delivered in a lead-free green package: SOIC-8.
- Supply Voltage Range: 1.7V to 5.5V
- 2-wire Serial Interface I2C Compatible
- 400kHz and High Speed 1MHz Transfer Rate Compatibility
- Byte and Page (up to 256 Bytes) Write Mode
- Partial Page Write Allowed
- Self-timed Write Cycle (3ms MAX)
- Software Write Protection by Blocks
- Quarter, Half or Whole Memory Array
- Hardware Write Protection on the Whole Memory Array
- Additional 256-byte Write Lockable Page and 128-bit Unique ID
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Operating Current
- Write Current: 4mA (MAX)
- Read Current: 1mA (MAX)
- Standby Current: 5μA (MAX)
- High Reliability
- Endurance: 1,000,000 Write Cycles at TA = +25℃
- Data Retention: 100 Years at TA = +25℃
- ESD Protection (HBM): 6000V
- Operating Temperature Range: -40℃ to +125℃
- RoHS Compliant and Halogen Free
- Available in a Green SOIC-8 Package
